Johny Cezve Coffee Pot Small

Temperature switch
50°C- 300°C power regulator to adjust the resistance temperature with 370°C safety switch to protect the device.

Quartz sand & Stainless steel bucket
Stainless steel bucket for receiving sand for greater resistance with specially treated quartz sand for resistance to very high temperatures.

Water temperature instrument
Independent 600W heater with separate power switch and water temperature gauge.

The appliance has:

1. A heating element of 1500W cast in aluminum for constant temperature;
2. And adequate heat transfer for the coffee brewing.
3. Adequate insulation to prevent heat transfer on the surface of the appliance.
4. Thermostat 50 – 300°C for the regulation of the heating element’s temperature.
5. Safety switch 370°C for the protection of the appliance.
6. Removable water collector.
7. Supplied with one small brass coffee pot and one bag of special sand.

Traditional coffee machine for brewing coffee in the sand (“hovoli”), for professional use. The “hovoli” machine adjusts a traditional technique to the needs of the modern professional and provides:

• Exceptional coffee quality,

• Due to stable operating temperature maintained by the hot sand
• Rapid coffee preparation
• Attractive appearance with impeccable design

The appliance has:
• A heating element of 1500W cast in aluminum for constant temperature;
• And adequate  heat transfer for the coffee brewing
• Adequate insulation inside,
• To prevent heat transfer on the surface of the appliance.
• Thermostat 50⁰C- 300⁰C for the regulation of heating element’s temperature.
• Safety switch 370⁰C for the protection of the appliance.
• Supplied with one small brass coffee pot and one bag of special sand.

ESPRESSO SYSTEM AV
The most consistent and stable under-counter espresso equipment available. Crafted and sold in full partnership with La Marzocco. The product of years of collaborative R&D between Modbar and La Marzocco, and based on R&D from the Linea PB and Linea Mini, Modbar Espresso AV comes with the same level of reliability, performance and temperature stability that made the Linea PB an industry icon.

Unique configurations
Set up one or two taps per module, arrange your under-counter however you like to make the most out of your available space.

Multiple brewing modes
Choose between multiple brewing modes: pulses, mass, or brew ratio to fine-tune the perfect espresso volume.

Consistent temperature
Water is heated at multiple stages to allow perfect temperature stability shot after shot.

Programmable lever
Easy-to-use lever with 4 programmable positions.

STEAM SYSTEM
More than just a steam station, Modbar Steam delivers a minimal, modern aesthetic coupled with power and control. Give your customers a full view of their drink being prepared, from espresso pull to rosetta. Recreate a traditional espresso machine with two Steam taps next to your Modbar Espresso, or set up distinct service areas to suit your workflow. Cafes can add a Steam tap or two to boost throughput, rather than purchasing a second full espresso machine.

Steam
Modbar Steam delivers a minimal, modern aesthetic coupled with power and control. Crafted for ease of use and maintenance.

Unique configurations
Set up one or two taps per module, arrange your under-counter however you like to make the most out of your available space.

Extra dry steam performance
Our improved design guarantees dry steam by eliminating condensation in critical areas along the steam path.

Pro touch wand
Safely handle our cool-touch, double wall, vacuum-insulated steam wand.

Refresh button
Avoid scale formation by allowing water to recirculate inside the boiler by pressing this dedicated button.

NEW! Features the PRO 3 Brew Head with a 70ml reservoir and a stainless steel portafilter that accepts 16-24 grams. Full control over all brew variables. No preheat required. Integrated Shot Mirror included.

Brew like a PRO with espresso anywhere! The Flair PRO 3 is an evolution in manual espresso brewing, featuring an integrated Shot Mirror, No Preheat Thin Cylinder, and a Preheat Funnel. Read a review from The Next Web

Maintaining all the performance of the PRO 2, the PRO 3 is an incredible lever-based, manual espresso maker, providing you with full control over all brew variables. This level of control over your espresso extraction compares to machines that cost 10x more than the PRO 3. In addition, the Flair PRO 3 still includes:

• Pressure gauge with a targeted espresso zone between 6-9 BAR
• A bottomless portafilter for incredible flow dynamics
• 70ml reservoir with a 56ml maximum espresso yield
• A removable stainless steel spout
• A silicone handle grip for brewing ergonomics
• A silicone protective wrap to improve gauge durability
• All metal brewing cylinder and frame

The PRO 3 has a small footprint and comes with a molded carrying case, meaning you can easily store the PRO 3 when not using it, or leave the small frame on your counter for all to see. Brew like a PRO today and experience handcrafted espresso.

• Flair PRO 3 Brochure
• Flair PRO 3

THE DREAM MACHINE

Whether it’s the cornerstone of your cafe or the prize jewel in your kitchen, the Slayer Espresso Single Group is unmatched in design and innovative technologies.

Fully equipped with patented needle-valve technology for ultimate flow rate control, an independent brew boiler for impeccable temperature stability, and an individual boiler for unlimited steam capacity. This machine won’t stop until you do steam and pull shots simultaneously and continuously without pressure drops or temperature loss. You’ll have all the necessary tools to extract the best flavors from each coffee over and over again.

A Single Group version of the Slayer Espresso. We’ve taken just enough out to make it fit on a standard home kitchen counter and run on 110v power

ESSENTIAL FEATURES

Incredible Temperature Stability
Unique heating system heats up quickly, gives super consistent temperature at the group and an unrivaled steam capacity for machines in its segment

Rotary Pump
Commercial style pump gets to pressure fast and can draw from an external reservoir

Patented Needle Valve
Espresso flavor profiles like none other by grinding finer and using a restricted water flow rate

Independent Brew & Steam Tanks
Hot, stable water & steam on-demand always

Handcrafted & Customizable
Built with form and function in mind choose the wood, metal, color, accessories the possibilities are endless

Add Versatility with Optional Accessories
Removable Drip Tray basin allows for a wider range of applications and uses

Intentional Design
Shot mirrors to keep an eye on the perfect extraction, low-profile for engaging with guests, ergonomic features that feel good to work on everything made with the user in mind

Professional Grade Tool
Commercial group and internal parts make this a capable tool for a business or home this grouphead is rated at 1 million cycles

• Manual Guide
• Espresso Installation

THE ULTIMATE COFFEE PROFESSIONAL’S TOOL

This machine provides flow rate control via patented needle-valve technology allowing the barista to extract espresso that is unparalleled in flavor and mouthfeel.

It comes equipped with an independent brew boiler per group for impeccable temperature stability and a dedicated boiler for unlimited steam capacity. The Slayer Espresso is unmatched in innovation and capabilities it is the dream machine.

Slayer’s flagship product. Uncompromisingly manual and completely focused on extraction. It is the only espresso machine that lets you precisely and consistently control the flow rate of water allowing you to grind coffee finer and develop incredible flavor profiles.

ESSENTIAL FEATURES

Incredible Temperature Stability
Heats up quickly, unlimited steam capacity, & consistent temperature at the group

Patented Needle Valve
Grind finer and perfect your flavor profile with a restricted water flow rate that produces espresso unlike any other machine

Independent Brew & Steam Tanks
Always have hot, stable water & steam on-demand

Handcrafted & Customizable
Built with both form and function in mind—the choice is yours on wood type, panel color, metal finishes, cup rails, the possibilities are endless

Commercial Grouphead
Equipped with a resettable and life-time shot counter, this grouphead is rated at 1 million cycles

Intentional Design
Shot mirrors to keep an eye on the perfect extraction, low-profile for engaging with guests, ergonomic features that feel good to work on everything made with the user in mind

• Manual Guide
• Espresso Installation