The Rhinowares Classic Milk Pitcher has been developed by people who understand the needs of the specialty coffee industry. The Rhinowares range of Milk Pitchers Feature: – Classic Rhinowares spout design: Perfect for smooth pouring and latte art. – Ergonomically designed handle: Great for the busy barista! – Available in: 360ml (12oz), 600ml (20oz) & 950ml (32oz).

Measurements etched right into the interior of both sides of the pitcher. The scale is etched in both ounces and millilitres to reduce the guess work when pouring milk. Reducing the waste means dollars saved for your cafe.

The Rhino Coffee Gear pitchers are thick – 1mm food grade stainless steel provides better stretch time for texturing milk. Ideal for the 12oz and 20oz sizes. The heavier weight lends to its durability and professional feel.

The handle has been ergonomically designed for the busy barista.

Rhino Coffee Gear listened to a lot of market feedback from Baristas who love pouring latte art. A common request was to have a pitcher with a larger capacity than a 12oz but smaller than a 20oz. So, the 450ml/15oz pitcher was a logical addition to the range. The 450ml/15oz  Rhino Classic Milk Pitcher is the perfect all-rounder for baristas and home users alike, boasting a range of colors, a food-grade stainless steel interior, and an ergonomically designed handle that ensures maximum comfort and control. The spout design has been crafted for great control and accuracy.

Whether you’re a seasoned barista or just someone who loves experimenting with latte art at home, the 450ml/15oz Rhino Classic Milk Pitcher’s sleek design and impressive functionality make it stand out from the crowd, and its size is just right for all your latte art needs.

If you’re searching for a milk pitcher that can help you make the most exquisite latte art, then look no further than the Rhino Coffee Gear Classic Color Milk Pitcher.

Features:
• Powder-coated exterior and Food-grade stainless steel interior (0.7mm thick) with a quality commercial feel
• Well-crafted spout design: Perfect for smooth pouring and latte art
• Ergonomically designed handle: Great for the busy barista

This 70ml (2.4 ounces) handled shot glass is perfect for pulling double shots. An updated handle design helps to protect fingers from the heat of a freshly dropped shot. Graduated measurement marks make it so easy to get the shot right.

Rhino Coffee Gear is practical, innovative and built tough for the hard-working coffee industry. They develop and manufacture their own products to be able to meet the precise needs of the coffee professionals as well as forecast and respond to changes in the global market.

The Barista Cloth Set has been developed to assist cleaning and maintaining coffee machines in a commercial environment and is also suitable for home machine use.

Using a unique blend of polymide and polyester, these special heavy duty cloths do a fantastic job of keeping coffee equipment clean and ready for quality coffee production.

Steam Wand Cloth: Having a separate steam wand cloth is important. Best used damp, the steam wand cloth allows for quick and easy removal of milk residue. It has a tremendous capacity and is large enough to refold a number of times for maximum use. Measures 200 mm x 200 mm / 8 inches x 8 inches

Coffee Cloth with Belt clip: This heavy duty microfiber cloth has been designed to quickly and easily remove coffee waste from group handles and related parts of the machine with ease. Complete with “belt clip” this generous knee length cloth makes keeping your machine in A1 condition a breeze. Measures 310 mm x 600 mm /12 inches x 24 inches

Multipurpose Cloth: This multi-purpose cloth is designed to outlast, out perform and do away with your old-style disposable all purpose cloth and sponge. Ideal for cleaning and polishing coffee machines. Measures 310mm x 310mm /12 inches x 12inches

Washing instructions: wash separately or with lint free articles. Do not use fabric softener. Remove clip before washing (where applicable)

The easy-to-read dial on the Rhino Coffee Gear Milk Thermometer allows for quick and accurate measure of textured milk and other beverages. The specially designed stainless steel clip allow the thermometer to sit perfectly in any milk pitcher. Designed with positive lock, quick-release action, the thermometer stem can be adjusted to the desired height. When the clip is removed, the thermometer can also be used for general purpose cooking needs. Height of thermometer is 5″ (13cm).

Effective temperature range is 0 to 220F or -18 to 104C.
How to use:
Insert the stem of the thermometer through both holes in the clip. Pressing the clip together will allow for easier positioning along the thermometer stem. Push the clip down onto the side of the pitcher and position it until the stem tip is sitting just above the bottom of the pitcher.

Temperature guide:
Steamed Milk : 122-149F/50-65C
Espresso : 185-194F/85-90C
Black Tea : 212F/100C
Green Tea : 160-180F/70-80C

Important: Always position the Rhino Coffee Gear Milk Thermometer on the pitcher prior to filling it to ensure you have it seated at the correct height.

The specially designed stainless steel clip allow the thermometer to sit perfectly in any milk pitcher. Designed with positive lock, quick-release action, the thermometer stem can be adjusted to the desired height. When the clip is removed, the thermometer can also be used for general purpose cooking needs

CAUTION: DO NOT LEAVE IN HOT OVEN OR MICROWAVE.

NOTE: Clean the thermometer stem before and after each use.

Easy to set and read digital thermometer for quick accurate measurement of textured milk and other beverages. An audible alarm beeps when the desired temperature you set has been reached. The specially designed stainless steel clip allows the thermometer to sit perfectly in any milk pitcher. Designed with positive lock, quick-release action, the thermometer stem can be adjusted to the desired height. When the clip is removed, the thermometer can also be used for general purpose cooking needs. Digital Thermometer measures 5″ (13cm).

Temperature range is -50 to 250C (-58 to 482F)

How to Use:
Insert the stem of the thermometer through both holes in the clip. Pressing the clip together will allow for easier positioning along the thermometer stem. Push the clip down onto the side of the pitcher and position it until the stem tip is sitting just above the bottom of the pitcher. Set your desired temperature for an audible alarm or just read the display for desired temperature.

Temperature guide:
• Steamed Milk: 122-149F/50-65C
• Espresso: 185-194F/85-90C
• Black Tea: 212F/100C
• Green Tea: 160-180F/70-80C

Important: Always position the Rhino Coffee Gear Milk Thermometer on the pitcher before filling to ensure you have it seated at the correct height.

CAUTION: DO NOT LEAVE IN HOT OVEN OR MICROWAVE.
NOTE: Clean the thermometer stem before and after each use.

AccuTemp Stick-on Thermometer : This Rhino Coffee Gear Accutemp stick on thermometer can be placed on your milk frothing pitchers to help achieve a perfect temperature result every time! The state of the art liquid crystal indicators turn from green to black as you steam your milk and the indicated temperature is achieved.
Unlike standard analogue thermometers which tend to have a slight time delay as they come to temperature, the Accutemp is lightning fast, and never in your way with its super thin design.

This Thumpa is an 860mm tall knockout tube that was designed with durability in mind. Commercial coffee waste bins need to withstand being hit, bashed and dropped without coming apart. The Thumpa is virtually indestructible and perfect for the demanding needs of a busy coffee shop. Using high-density, shock-resistant polyethylene (HDPE), the Thumpa can really take a beating! The flared collar retains excess splatters. The slotted bar inserts and removes easily for cleaning, replacement, and maintenance. The top is also easily removed for easy emptying or for use in conjunction with a waste bag.

The Rhino Coffee Gear commercial knock chute is neat, stylish, and perfect for cafes, restaurants, and office applications. Made from heavy duty 304 stainless steel this knock chute has a small footprint, making it an easy fit into just about any position in a bench. Using an in-bench chute takes up less bench space (and keeps the floor clear), and allows for under-counter grounds disposal into a wide variety of multipurpose bins. The knock bar is welded to the sides which not only makes it secure but reinforces the structure making the Rhino Coffee Gear Knock Chute one of the toughest on the market! It also features a replacement rubber sleeve which helps to protect your portafilter and reduce noise.

The Rhino Coffee Gear Waste Tube is the perfect choice for the home espresso lovers looking for a benchtop solution for their used coffee grinds.