• Easy Setup -“Just Plug n Play”.
• Smooth heavy duty Castors.
• Brushed Stainless Steel Finish Door.
• Food Grade NSF approved Clear beer Tubing.
• Front mount electronic temperature control with LED display
• Plastic Drip Tray
• Chrome Plated Top Guard Rail.
• Auto Defrost
• Accommodates up to 50litres coffee kegs
• Controlling Nitrogen
• Digital Thermostat

Nitro System Cleaning & Maintenance
Upon Install:
Make Sure to run Citrus Draft Line Cleaner through your new system prior to serving customer drinks

Weekly
Stout Faucet:
Remove tip on stout faucet & ensure that all 5 holes in restrictor plate are open & equal in size. Soak tip & ristrioctor plate in soda water for 5 minute then rinse. Verify that all 5 holes are open & free of debris.

Kegerator and Draft Tower:
Clean and wipe down with food safe cleaner.

Bi-Weekly:
The system should be flushed bi-weekly. This means running Citrus Draft Line Cleaner through the system.
• Fill an attached keg with one gallon of water
• Add 4-6oz of Citrus Draft Line Cleaner to the keg
• Run through the system and stop when you see the solution
• Let the system sit for 15 minute
• After the 15 minutes, dispense the remaining
• Fill the keg with an additional gallon of warm water
• Flush the system using the gallon of warm water

Filtering Cold Brew:
We recommend using on of these filtering options:
Filter Bag- This is like a large tea bag for the coffee grounds during the brewing process. Filter bags provide highly filtered cold brew & easy clean up

Filtering When Kegging:
When your cold brew is done brewing, the next step is kegging. Consider using a filter during this process. A filter is very effective in reducing particles.

In Line Beverage Filter:
This is small screen Filter that is installed in the beverage line, between the keg and the nitro Infuser. The cold brew passes through the filter as it leaves the keg. This filter requires a daily cleaning. Oftertertimes the In-Line Filter is used in addition to one of the above option. Failure to filter your Cold Brew will impact your dispensing system.

How to use Citrus Draft Line Cleaner?
• Fill a keg with one gallon of warm water.
• Add 4-6oz of Citrus Draft Line Cleaner to the gallon of water that is inside the keg
• Run through the system until the solution dispenser. Close the faucet once you see the solution.
• Let the system sit for 15 minutes to allow the solution to properly work.
• After the 15 minutes, dispense the remaining gallon through the system.
• Fill the keg with an additional gallon of warm water.
• Flush the system using the gallon of warm water.